Analysis of jet target distance of high pressure cleaning machine in the field of steel plate cleaning

Taiwan luxiong was founded in 1982. In 2000, he cooperated with Taiwan bureau of economy and industry to develop products and set up a subsidiary company in taizhou, zhejiang province in the same year.

Luxiong company mainly produces and sells high - pressure mist machines, high - pressure cleaning machines, high - pressure plunger pumps. As a pioneer in disease and pest control and three-cylinder plunger pump industry, we have been working hard to optimize and research and develop products. We have been honored as a high-tech enterprise with high salary in the province, a high-tech enterprise with high salary in the city and an excellent enterprise in the city

Steel plate needs to be cleaned before application, so most users use high pressure cleaning machine to do this work, that is, the high pressure cleaning machine cleaning steel plate can highlight high efficiency, high quality, no pollution, low cost, not damage cleaning materials and other characteristics. Of course, to achieve the above objectives also have the corresponding premise, more basic is to choose the high pressure cleaning machine to clean the steel plate at a reasonable target distance.

It is known that the target distance of high pressure cleaning machine for cleaning steel plate is related to the impact force of water jet. Under different pressure and flow conditions, there is an optimal range of target distance, and within this range, the maximum impact force of water jet can be obtained and the ideal cleaning effect can be achieved.

When cleaning the steel plate, when the nozzle is determined, the jet target distance is the only variable that affects the change of jet coverage area, so the jet target distance is set to 120mm, 150mm, 200mm and 300mm respectively, so as to observe the change of water jet coverage area and water jet strike force.

The test results show that if the jet distance of steel plate cleaning by high pressure cleaning machine doubles, the jet coverage area will increase by 4 times, but the water jet impact force is only 1/4 of the original. In the same way, if the target distance of water jet is reduced by half, the coverage area of water jet is only 1/4 of the original area, but the impact force of water jet is 4 times of the original.

According to this rule, when designing the efflux target distance of steel plate cleaning by high pressure cleaning machine, it is necessary to consider not only the increase of water jet hitting force caused by the decrease of efflux target distance, but also the decrease of efflux target distance to reduce the area covered by a single nozzle. That is to say, to cover the same width of cleaning area, we need to increase the number of high pressure cleaning machine nozzles.