Working principle and operation specification of high pressure cleaning machine

Taiwan luxiong was founded in 1982. In 2000, he cooperated with Taiwan bureau of economy and industry to develop products and set up a subsidiary company in taizhou, zhejiang province in the same year.

Luxiong company mainly produces and sells high - pressure mist machines, high - pressure cleaning machines, high - pressure plunger pumps. As a pioneer in disease and pest control and three-cylinder plunger pump industry, we have been working hard to optimize and research and develop products. We have been honored as a high-tech enterprise with high salary in the province, a high-tech enterprise with high salary in the city and an excellent enterprise in the city

Under normal circumstances, high - pressure cleaning machine is also called high - pressure water cleaning machine, high - pressure water jet is only a simple form of energy conversion and application. The working principle of the high pressure cleaning machine is that the power-driven pump can absorb and discharge a certain amount of water into the road through a process of absorbing and discharging water, so that it can reach the road with great energy. The hole diameter of high pressure nozzle is much smaller than that of high pressure pipe, so when the water reaches the high pressure nozzle, it must be accelerated to flow out of the nozzle hole. Only in this way can the water accelerated through the nozzle hole form the jet flow. It is called jet operation when the jet blow from high pressure cleaning machine is on the cleaning object. When the impact force of high pressure water jet is greater than dirt and surface adhesion, high pressure water jet will remove dirt and wash away, so as to clean the object. This is the specific working principle of high pressure cleaning machine. Through the above introduction, we have made clear the working principle of high pressure cleaning machine. After understanding this principle, we can know how to operate this cleaning equipment is the most scientific. High pressure cleaning machine is through high pressure water jet to clean dirt, so, the use of high pressure cleaning machine for cleaning is currently recognized in the world as the most scientific, economic, environmental protection cleaning method. Therefore, when carrying out industrial cleaning, this kind of cleaning equipment is the wisest choice.

High - pressure cleaning machine must be operated in strict accordance with safety operation specifications to ensure its safe and correct use.

1. Prepare specifications before work

A. Operators must undergo pre-service training and repeated training

B. The high-pressure cleaning machine is a special cleaning equipment, and the operator needs the supporting protective equipment.

C. it is forbidden for operators to drink alcohol and operate fatigue before work;

D. The working group shall have at least 2 persons, and the specific working personnel shall be determined according to the size and difficulty of the project;

E. Check the oil level of the equipment and the main pump to prevent the equipment from sintering due to lack of oil; F. The main inlet of the equipment is confirmed to be tightly connected.

Ii. Operation specifications

A. The starting working group shall keep the information unimpeded, and the pump operator shall not start the cleaning equipment until the instruction from the operator of the gun head is obtained.

B. Keep alert at all times during the working process. Before and after lifting the pressure, the pump operator should check the hose and the joints so as to timely find the leakage and other accident obstacles;

C. If any abnormality is found after the equipment is started, the equipment must be stopped for inspection to clean the equipment, and it shall not be started again before the failure is eliminated;

D. when the following situations occur, the operation must be stopped.

1) any unauthorized person or other object entering the work site,

2) finding hidden dangers and failures, and equipment alarm.

3) there are cases that contradict this safety code.

Iii. Equipment maintenance

A. Regularly check the working status of each part, and check whether the parts and fasteners are well displaced to ensure no damage to the parts;

B. The operator, under the guidance of professional technicians, maintains the safety valve, joints and shotguns in accordance with the routine maintenance procedures;

C. The pumps and other important parts shall be regularly serviced and maintained by professional technicians and shall be operated in strict accordance with the requirements of the equipment manufacturer.